1.3–2.5 GAL
Quick draws at one sink
Start here for handwashing or a quick rinse. Check how much room the drain trap leaves.
Shop compact tanksWarenkorb
Dein Warenkorb ist leer
CAMPLUX / RESIDENTIAL / POINT OF USE
Keep hot water close to the tap.
Give a kitchen, bathroom or utility sink a local supply of hot water. Compare how much each tank stores, how it connects to power and how much room the body needs.
1.3–2.5 GAL
Start here for handwashing or a quick rinse. Check how much room the drain trap leaves.
Shop compact tanks4–8 GAL
Compare these for longer rinses at a kitchen or utility sink. Check recovery if you expect back-to-back draws.
Shop mid-size tanks10–18 GAL
Plan the footprint, full tank weight and power connection before choosing a larger tank.
Shop larger tanksMEASURE BEFORE YOU ORDER
Enter usable width, height and depth after allowing room for the pipes, relief discharge, door swing and service access. This checks published body dimensions only; confirm clearances and mounting in the model manual.
Models with missing or conflicting dimensions stay out of measured matches.
SHOP THE COLLECTION
Compare stored gallons, heating wattage and installation space. Use the model notes to narrow your shortlist, then check the exact fit and power connection.
No models match these choices. Clear measurements or reset the filters to see more.
Handwashing & quick rinses
Connection120V plug-in
1.3 gal for short draws at one sink. Confirm clearance around the drain trap.
More reserve at one sink
Connection120V plug-in
Choose over the 1.3 gal ME10 when you want more stored water at the same listed wattage.
Kitchen sink cleanup
Connection120V plug-in
A 4 gal option with an adjustable thermostat. Verify body depth before ordering.
Utility sink cleanup
Connection120V plug-in
More storage than the 4 gal ME40 at the same listed wattage. Confirm floor or wall space.
Tight under-sink spaces
Connection120V plug-in
9.7 in listed body depth. Mounting bracket included.
Flexible mounting
Connection120V plug-in
2.5 gal with shelf, wall or floor mounting listed. Confirm the exact dimensions.
4 gal with a listed footprint
Connection120V plug-in
Compare its 14.5 in body height with your available cabinet space. Mounting bracket included.
Added storage near the tap
Connection120V plug-in
6.5 gal with a mounting bracket included. Confirm fit for the larger body.
8 gal at point of use
Connection120V plug-in
Compare its 15.5 in body depth and ¾ in NPT water connections before ordering.
Standalone or booster
ConnectionVerify connection
10 gal with a 1.5 kW heating element. Confirm wiring and placement for your setup.
Largest tank in the range
Connection120V hardwired
18 gal of storage. Plan the 120V hardwired connection before choosing this model.
BEFORE YOU PICK A MODEL
For short draws at one sink, start with compact models. For repeated rinses or cleanup, compare more storage and look for the model’s published recovery data.
Use the listed width, height and depth to shortlist models. Allow space for fittings, the relief discharge, mounting and future service.
Voltage and plug-in versus hardwired tell you how the unit connects. Wattage is the heating input; check it alongside storage and recovery rather than using it alone to estimate available hot water.
BEFORE YOU INSTALL
A long hot-water line can hold a volume of cooled water between draws. A local tank stores hot water close to the sink, so there is less cooled water in the short run between the tank and the tap.
It tells you the listed storage volume. How much warm water reaches the tap depends on inlet and tank temperature, the flow at the fixture and how quickly the heater recovers. For repeated draws, compare published recovery data for the exact models.
Measure usable width, height and depth with the cabinet door closed. Account for the trap, shutoffs, inlet and outlet direction, relief discharge and service space. The size tool checks the tank body only; confirm the allowed orientation, clearances and support in the manual.
No. The ME200B is listed as 120V hardwired. Check the exact model’s connection, circuit and installation requirements before ordering. Where the connection is not confirmed on the listing, ask for the model manual.
If your fixture needs sustained draws, compare tankless models by flow at your required temperature rise and check available electrical service. For a mini tank, compare stored volume and recovery between draws.
Bring instant hot water to your faucets with Camplux’s compact and efficient Electric Mini Tank Water Heaters. Ideal for providing hot water to remote sinks, kitchenettes, bathrooms, or areas with limited space, our mini tank heaters offer quick installation, efficient performance, and immediate access to hot water. Their small size, ease of installation, and energy-saving features make them a perfect choice for apartments, RVs, offices, and home renovations.
Complete your home’s hot water solution by combining these mini-tank systems with our broader range of Tankless Water Heaters, powerful Gas Tankless Water Heaters, or advanced Electric Tankless Water Heaters.